Cap Sealing / Inter Lock Pneumatic Punching Machine
Features
- This machine is used for the Punching of bores of Aluminum doors and Windows Smoothly and efficiently.
- The machine is used for punch hardware holes of Windows and doors and other holes or grooves inWindows and doors.
- Controled by the Pneumatic pedal and Works steady.
- The Four working position, can complete the Punching of hold hand installation groove, cutting angle and the end of the actuator.
Technical Parameter
| Input Voltage | 380V/50Hz |
| Input Power | 2.2KW |
| Air Pressure | 0.6～0.8MPa |
| Rated oil pump pressure | 16Mpa |
| Press nominal pressure | 16KN |
| Punching travel | 30mm |
| Die contour dimension | 340*240*500mm |
| Closing height | 185mm |
| Overall dimension | 600×480×1320mm |
Main Accessory:
- Motor - Sanyang
- Saw blade - Weike
- Cyliner - Baide
- Ac Condenser - Scheduler
- Air Filter - STNC
- Solenoid Valve - STNC